Ways to Upgrade Your Boat for Family Lake Trips This Summer
There’s no doubt that boats provide a lot of entertainment, including wake surfing, fishing, or sailing. But there is no such thing as a perfect boat, and nearly every great boat can be improved upon. Are you ready to get your hands dirty and help out with some DIY boat improvement? These DIY projects are simple, inexpensive, and guaranteed to make your boat cooler.
Install a Cradle for Your Phone
To avoid having to dig it out every time it rings, or even if you can hear it, most boaters place their cell phones in a glove box or on top of a console when they get on board (until the first big wave sends it tumbling to the deck). Isn’t it convenient to have a phone holder right next to the steering wheel?
Install a Sound System
There are ways to improve your boat’s sound system, like installing a utv soundbar system. This can make your experience on your boat more enjoyable. You can blast music and make it feel like a party for your friends and family.
Increase the Number of Rod Holders
Is it possible to have too many rod holders on a fishing boat? Not at all! As long as you stick to clamp-on rail mounts or surface mounts, adding them is a cinch. With a simple screwdriver or Allen key, you can attach the clamp-on to the surface and secure them with three or four bolts. There are a variety of rod holders on the market, but even if you opt for aluminum or stainless, you won’t have to fork over a lot of money.
Configure USB Charging Ports
Tired of your semiconductor switches running out of battery power when you’re 10 miles away from the dock? Adding Charger terminals to your boat solves the problem quickly. For about $20, you can get a double-port receptacle with a round one-inch cut-out and only a positive and negative power feed from the boat’s 12-volt system.
There is no such thing as a perfect boat, and nearly every great boat can be improved upon. DIY projects are simple, inexpensive, and guaranteed to make your boat cooler. As long as you stick to clamp-on rail mounts or surface mounts, adding cup holders is a cinch. There are plenty of low-cost models available that can be jet or peel-and-stick mounted in minutes. Adding USB Charger terminals to your boat solves the problem quickly.
2013 © YourAmazingPlaces.com
Back to Top ↑